HVAC

2-Way and 3-Way Elastomer Seated

 

Uses:

Elastomer lined butterfly valves are used for high capacity control for low pressure applications where shut-off is essential. Valve is ideal for cooling tower diverting or bypass control. Applications include hot chilled water system change over, off season isolation, and chiller head pressure.

Mating:

For use with 125 or 150 lb. ANSI flanges.

Rotations:

PDC valves are offered in two rotations. The 0 to 60 degree opening is used when optimum control is required for lineal flow characteristics. The 0 to 90 degree opening is used when the valve is sized based on its maximum capacity and control is not a concern.

3-Way Valve Assemblies for Mixing or Diverting Service

PDC Elastomer Seated Butterfly Valve Assemblies are ideally suited for 3-way control- blending or diverting. Two PDC valves are mounted on a 125# cast iron tee; one valve complete with power actuator, the second valve controlled through connecting slave linkage.

PDC's 3-Way Assemblies are shipped as a complete unit, assembled, mounted, and fully ready for field installation.

Elastomer Lined Series - 27 (Sizes 2" to 36")

1075 Montour West Industrial Park
Coraopolis, PA 15108
ph: 724.695.3440 toll free (US): 888-PDC-4070 fax: 724.695.8635
email: Sales@pdcvalve.com