Product Catalogue

Econ-O-Trol Series 09 - 2" thru 14" for 125/150 lb. Flanging

Download this page only in PDF format
Download the Econ-O-Trol Series - 09 Section in PDF format

Typical Dimensions: 2" thru 14"

Size A B C D E F H Max.
Δ P
Approx.
Wt. (LB.)
2" 2 2-3/4 5-3/8 1-1/2 3-7/8 4-1/4 1/2 150 9#
2"-1/2 2-1/2 3 5-5/8 1-1/2 4-5/8 4-1/4 1/2 150 10#
3" 3 3-1/8 5-7/8 1-1/2 5-1/4 4-1/4 1/2 150 11#
4" 4 4-1/4 6-3/8 1-1/2 6-3/8 4-1/4 1/2 125 12#
5" 5 4-7/8 6-7/8 1-1/2 7-1/2 4-1/4 1/2 100 15#
6" 6 5-3/8 7-3/8 1-1/2 8-1/2 4-1/4 1/2 80 17#
8"L 8 6-1/2 8-3/8 1-1/2 10-3/4 5-1/8 1/2 25 23#
8"H 8 6-1/2 9-5/8 1-7/8 10-3/4 5-1/8 3/4 90 32#
10" 10 8 10-5/8 1-7/8 13 5-1/8 3/4 70 40#
12" 12 9-1/2 11-5/8 1-7/8 15-1/4 5-1/8 3/4 50 50#
14" 13-1/8 10-1/2 12-1/8 1-7/8 16-1/2 5-1/8 3/4 30 70#

* "G" Length and configuration of the shaft end will vary to accommodate specific actuators. Refer to the accessory section for typical flatted, keywayed, and hexed end configurations available.

MAX. ΔP is based on 0° disc position, using standard materials of construction at a maximum temperature of 450° Fahrenheit.
Consult factory for MAX. ΔP for elevated temperatures.

Process Development & Control, Inc. reserves the right to make design improvements and/or change dimensions without notice.

Additional Information