Product Catalogue
PDC Reduced Port Series 15 - 3" thru 14" for 125/150 lb. Flanging*
Download
this page only in PDF Format (88kb)
Download Reduced
Port Series 15 Section in PDF Format (547kb)
General Description
The PDC "Reduced Port" series butterfly valve is available in sizes from 3" thru 14" in a combination of materials and optional features suitable for most mid-range differential pressures and service conditions.
Features
- Inboard bushings of graphited bronze for long life, non-freezing, low torque characteristics.
- Close tolerance machining for minimal leakage and dependable flow characteristics.
- Adjustable packing-Graphited TEFLON ® Braid. Valves can be repacked without removal from line.
- Rugged mounting pads drilled and tapped for ease of installing actuating equipment and accessories.
- Flatted, keywayed or hexed ends on shafts are available to facilitate factory or field mounting of all types of actuating equipment.
- Lightweight, solid ring, wafer design for ease of installation. Four holes to insure proper alignment without transfer of pipe stresses to the valve body.
Standard Materials and Seat Construction:
| Body: | Cast Iron |
| Disc: | Cast Iron |
| Shaft: | 416 Stainless Steel |
| Seat: | Swing-thru |
| Bushing: | Graphited Bronze |
| Packing: | Graphited Teflon Braid |
| Packing Nut: | Brass |
Optional Materials and Seat Construction
| Body: | High Temperature Iron, Carbon Steel, 316 Stainless Steel, 304 Stainless Steel |
| Disc: | High Temperature Iron, Carbon Steel, 316 Stainless Steel, 304 Stainless Steel |
| Shaft: | 316 Stainless Steel, 304 Stainless Steel, Incoloy, Monel |
| Seat: | Angle (3"-4"), Metal Step (3"-14"), Tadpole Step (8"-14") |
| Bushing: | 316 Stainless Steel, 304 Stainless Steel, Glass Filled Teflon, Metcar, Macor |
| Packing: | High Temperature Braid, Pure Teflon Braid, Teflon V-Ring |
| Packing Nut: | 316 Stainless Steel |
Temperature:
To 450°F with standard materials. To 900°F with optional materials. (Consult Factory)
PDC Valve Coating
Consult Factory
*Also Available in RPM Drilling in Most Sizes: Consult Factory
Design Options
- Seat Options
- Types of Stuffing Boxes
- Shaft Configuration
- Metal seated valves material selection chart
Additional Information
1075 Montour West Industrial ParkCoraopolis, PA 15108
ph: 724.695.3440 toll free (US): 888-PDC-4070 fax: 724.695.8635
email: Sales@pdcvalve.com